> Urban > TSF Unifix 4Ski Dubai Indoor > DUBAI, United Arab Emirates

TSF Unifix 4
Ski Dubai Indoor

DUBAI, United Arab Emirates

Descriptif

When a unique attraction sets up in the heart of a future metropolis, when the search for exclusivity calls for a non-standard configuration, linked to the architectural design of the domain The innovative capacity  creates the 1st and only angled fixed chair lift in the world, with an intermediate loading platform. Seduced by the impressive ability to integrate the device and its silent operation, the Souk Al Nakheel selected the POMA Unifix solution.

Technical data :
Length 260 m
Vertical rise 57 m
Max. operating speed 1.50 m / s
Debit per hour 2400 p / h
Vehicle capacity 4 pers
Total Number of vehicles 59

Composants

Snow in the desert

40 ° C outside, -6 ° C inside ... The Dubai Ski Dome stages the event!

Motor station UNIFIX Compact

Tensionning and drive station, monopod. Compact architecture, line equipment of 8 compression sheaves, can free up a space station for access by snow groomers: easy snow removal. Particularly suitable for Indoor.

Fixed return station UNIFIX on metal drum

Ultra compact design for easy installation on narrow zones with difficult access (indoor halls, valleys, and peaks), with earthworks and landscaping reduced.
Result ... A successful environmental integration, cost optimized. “System of track pulleys" simplified sheave train settings, maintenance and snow removal facilities.

Sheave trains suspended from the ceiling

This concept offers 3 Special Indoor advantages: frees floor space through the removal of pylons (optimal safety for skiers), optimizes the ski hall and allows specific configurations.

angled Intermediate station

Intermediate station (disembarkment only), with an angle to meet customer requirements in terms of the Snow Hall configuration

reverse Angle... World Innovation

If the design of the angle of ascent is easy (using a conventional pulley), the descent angle requires using a special notched pulley synchronized to the connection point according to the position of the pulley, this can be accelerated or slowed down along with the demand.

return to top of the page save as PDF

Site optimized for: Firefox, IE7, IE8